JANOME 2222 Instruction Booklet download pdf (Page 58)

Sewing Light

The sewing light is located behind the face plate.

To change the bulb, take the face plate off the

sewing machine by removing the setscrew.

* Unplug the power supply before changing the

bulb.

* Do not dismantle the machine other than

explained in this manual.

(A) To remove .... Turn to the left.

To replace .... Turn to the right.

(B) To remove .... Push and twist to the left.

To replace .... Push and twist to the right.

(A)

(B)

WARNING

The bulb could be HOT. Protect your

fingers when handling it.

Oil the Machine

Oil the points as shown at least once a year.

Use good quality sewing machine oil.

One or two drops of oil is sufficient.

Remove excess oil, otherwise it may stain fabric.

In case machine is not used for an extended time,

oil it before sewing.

Oil behind the face plate

Remove the screw and face plate.

Oil the point as indicated in the illustration.

q Screw

w Face plate

Oil behind the shuttle hook area

Open the hook cover.

Remove the shuttle race ring and shuttle.

Oil the point as indicated in the illustration.

e Hook cover

r Shuttle race ring

t Shuttle

CAUTION

Turn off the power switch and/or unplug

the machine before oiling the machine

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

No comments

JANOME 2222 Instruction Booklet Page 58