JANOME 2222 Instruction Booklet download pdf (Page 28)

Pattern Selector Dial

Raise the needle and presser foot. Turn the

pattern selector dial to set the setting mark at

the symbol corresponding to the desired pattern.

q Setting mark

Note:

To avoid needle or fabric damage, make sure

the needle is up and out of the fabric while

selecting a stitch.

Turn the stitch length dial to set the setting mark

at the desired stitch length.

The higher the number, the longer the stitch

length

q Setting mark

• Adjust the dial in the 0.5–4 range when you

sew the zigzag stitch.

• Set the dial at “S.S.” to sew the stretch stitch

pattern sewing.

• If the stretch stitch pattern is uneven, turn

the stitch length dial in the direction of “–” to

compress it, or “+” to expand it.

Stitch Length Dial

S.S.

Adjusting Bobbin Thread Tension

For general sewing, the bobbin thread tension

does not need to adjust. However, you can adjust

the bobbin thread tension for a specific sewing

need.

Turn the adjusting screw to the right to tighten or,

to the left to loosen the tension.

Stitch Width Dial

Turn the stitch width dial to set the desired stitch

width at the setting mark .

The higher the number, the wider the stitch width

q Setting mark

Note:

Raise the needle above the fabric, when you

turn the stitch width dial.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

JANOME 2222 Instruction Booklet Page 28