JANOME 2222 Instruction Booklet download pdf (Page 38)

Button Sewing

q Pattern selector: C

w Presser foot: Satin stitch foot

e Thread tension: 2–6

r Stitch length: Any

t Stitch width: Adjust as necessary

y Feed dog: Dropped

Drop the feed dogs. Match the holes in a button

with the horizontal slot on the Presser foot.

Adjust stitch width matching the distance of the

holes on the button. Lower the foot to hold the

button in place. Check to see if the needle

enters into the holes on the button by turning the

handwheel by hand. Sew about ten (10) stitches.

To strengthen the shank, cut the threads leaving

about 4.0˝ (10.0 cm). Bring the needle thread

down through one of the holes on the button and

wind it around the shank. Bring the needle

thread to the wrong side (bottom side) and knot.

After button sewing is completed, raise the feed

dogs for normal sewing.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

No comments

JANOME 2222 Instruction Booklet Page 38