JANOME HD1000 Instruction Booklet download pdf (Page 30)

24

•Tension is too tight

q Needle thread (Top thread)

w Bobbin thread (Bottom thread)

e To loosen

r Right side (Top side) of fabric

t Wrong side (Bottom side) of fabric

If the bobbin thread shows through on the right

side (Top side) of the fabric, and the stitch

feels bumpy, turn the dial to a lower tension

setting number to loosen the needle thread

tension.

1

3

2

Adjust the Needle Thread Tension for a

Straight Stitch

• Correct tension

q Needle thread (Top thread)

w Bobbin thread (Bottom thread)

e To loosen

r To tighten

The ideal straight stitch has threads locked

between two layers of fabric, as illustrated

(magnified to show detail). If you look at the

top and bottom of a seam, notice that there are

no gaps. Each stitch is smooth and even.

When adjusting the needle thread tension, the

higher the number, the tighter the needle

thread tension.

Results depend on:

- stiffness and thickness of the fabric

-number of fabric layers

- type of stitch

1

5

4

2

1

5

4

2

• Tension is too loose

q Needle thread (Top thread)

w Bobbin thread (Bottom thread)

e To tighten

r Right side (Top side) of fabric

t Wrong side (Bottom side) of fabric

If the needle thread shows through on the

wrong side (Bottom side) of the fabric, and the

stitch feels bumpy, turn the dial to a higher

tension setting number to tighten the needle

thread tension.

3

4

3

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Comments to this Manuals

No comments