JANOME HD1000 Instruction Booklet download pdf (Page 22)

• Winding the Bobbin

z While holding the handwheel with your left

hand, turn the stopmotion knob in the

direction of arrow.

x Draw the thread from spool.

Pass the thread through the topcover thread

guide.

c Guide the thread around the bobbin winder

thread guide.

v Insert the thread through the hole in the

bobbin from the inside to the outside.

Put the bobbin on the bobbin winder spindle.

b Push it to the right.

n With the free end of the thread held in your

hand, depress the foot control.

Stop the machine when it has made few

turns, and cut the thread close to the hole in

the bobbin.

m Depress the foot control again.

When the bobbin is fully wound, stop the

machine. Return the bobbin winder spindle to

its original position by moving the spindle to

the left, and cut the thread.

, Tighten the stopmotion knob to engage the

clutch.

Note:

Return the bobbin winder spindle when the

machine stops.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

No comments

JANOME HD1000 Instruction Booklet Page 22