JANOME DC4030PR Instruction Booklet download pdf (Page 13)

• Winding the bobbin

z Draw the thread from the spool.

x Guide the thread around the thread guide.

c Thread through the hole in the bobbin from the inside

to the outside.

v Put the bobbin on the bobbin winder spindle.

b Push the bobbin to the right.

The indicator window will show sign.

n With the free end of the thread held in your hand,

depress the foot control. Stop the machine when it

has wound a few layers, and then cut the thread

close to the hole in the bobbin.

m Depress the foot control again. When the bobbin is

fully wound, it stops automatically. Return the bobbin

winder to its original position by moving the spindle to

the left, and cut the thread as shown.

v b

NOTE:

Make sure that the carrying handle is not being raised

when winding the bobbin.

NOTE:

The machine motor automatically stops after 2 minutes

if you do not stop the machine.

NOTE:

The machine will not sew until the spindle has been

returned to the left.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

JANOME DC4030PR Instruction Booklet Page 13