JANOME DC4030PR Instruction Booklet download pdf (Page 25)

z x c v b

n m

Button Sewing

q Stitch pattern:

w Needle thread tension: A

e Presser foot: Satin stitch foot: F

r Feed dog: Dropped

qwer

z Place the button so the holes of button matches to the

horizontal slot on the presser foot.

x Lower the foot to hold the button in place.

c Press the stitch width button (“+” or “–”) so the needle

will enter the left hole of the button.

v Turn the handwheel so that the needle will enter the

right hole of the button. Readjust the stitch width if

necessary.

b Stitch several times.

n After you finish sewing, cut the thread but leave

3" to 4" of thread at the button.

m With a hand sewing needle, draw the top thread to

the reverse side of the fabric and knot the threads.

* After the button sewing is completed, raise the feed

dogs for normal sewing.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

No comments

JANOME DC4030PR Instruction Booklet Page 25