JANOME 8002D Instruction Booklet download pdf (Page 6)

Connecting the Machine to the Power Supply

Before connecting the machine to the power supply,

make sure the voltage and frequency shown on the

machine conform to your electrical power.

1. Turn off the power switch, and connect the

machine plug to the machine socket.

2. Connect the power supply plug to your power

supply.

3. Turn on the power switch.

Controlling Sewing Speed

Sewing speed can be varied by the speed controller.

The harder you press on the controller, the faster the

machine runs.

Step on the speed controller with the presser foot

lifter up, and practice controlling the speed.

For Your Safety:

* While in operation, always keep your eye on the

sewing area, and do not touch any moving parts

such as the thread take-up lever, loopers,

handwheel, needle or knives.

* Always disconnect the machine from the power

supply:

— when leaving the machine unattended.

— when attaching or removing parts.

— when threading or cleaning the machine.

* Do not place anything on the foot control,

otherwise the machine will start inadvertently.

Power switch

2 Machine plug

3 Machine socket

4 Power supply plug

5 Power supply

6 Speed controller

1 Speed controller

Operating Instructions

(for U.S.A. and Canada only):

The symbol "O" of a switch indicates the "off" position of

the switch.

For an appliance with a polarized plug (one blade wider

than the other):

To reduce the risk of electrical shock, this plug is

intended to fit in a polarized outlet only one way.

If it does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician to install

the proper outlet. Do not modify the plug in any way.

The foot controller Model YC-482J or YC-482J-EC is

used with the sewing machine Model 7034D.

1 2 3 4 5 6 7 8 9 10 11 ... 41 42

Comments to this Manuals

No comments

JANOME 8002D Instruction Booklet Page 6

Comments to this Manuals

Related products and manuals for Sewing machines JANOME 8002D