JANOME Horizon Memory Craft 8200 QC Instruction Booklet download pdf (Page 71)

•Stitchpatternscannotbememorizedinthetwin

needle mode.

•Usethethreadcutteronthefacecoverwhen

trimming threads.

•Usenethreads#60orlargernumberforthetwin

needle sewing.

NOTES:

•Whenyousewpatternswiththetwinneedle,test

the stitches ﬁrst before you sew on the garment.

•UsethezigzagfootAorsatinstitchfootFfortwin

needle sewing.

•Whenchangingthesewingdirection,raisethe

needle and presser foot then turn the fabric.

•Whenyouselectstitchpatternsnotfortwinneedle

sewing and press the twin needle key, the twin

needle mark will blink on the LCD screen and the

caution buzzer sound.

Buttonholes and specialty stitches such as darning or

eyelet, and monogram cannot be selected.

e Twin needle key

r Twin needle icon

t Maximum width (3.0)

Select the desired pattern suitable for twin needle

sewing.

Press the twin needle key.

The LCD screen shows a twin needle icon and the

maximum permissible stitch width is restricted to 3.0 mm.

The needle drop position of straight stitches is restricted

to between 3.0 and 6.0.

After twin needle sewing is ﬁnished, press the twin

needle key. The twin needle icon blinks.

Replace the twin needle with a single needle.

Turn off and on the power switch or press the twin needle

key to return to the single stitch mode.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 91 92

No comments

JANOME Horizon Memory Craft 8200 QC Instruction Booklet Page 71