JANOME Horizon Memory Craft 8200 QC Instruction Booklet download pdf (Page 63)

Choose a soft, lightweight fabric such as batiste, gingham

or challis. Cut the fabric three times wider than the

projected width.

Sew rows of straight stitches, 1 cm (3/8˝) apart with the

stitch length “5.0” and thread tension dial at “1” to across

the area to be smocked.

q 1 cm (3/8˝)

Tie the threads along one edge. From the other edge, pull

the bobbin threads to distribute the gathers evenly.

NOTE:

Pull up the bobbin thread and draw a 10 cm (4˝) thread

tail to the back before starting to sew.

Use the thread cutter on the face plate.

Smocking

Machine settings

q Pattern: MODE 3: 16

w Thread tension: AUTO

e Presser foot: Satin stitch foot F

r Foot pressure: 5

* Stitch patterns (mode 3) can also be

used.

x Sew down the left side, guiding the fabric so the right

hand stitches fall in open space. After ﬁnishing the left

side, press the mirror image key. Sew down the other

side (refer to page 73 for mirror image sewing).

q Mirror image key

c Remove the yarn or fabric threads between the

stitching.

Select a smocking stitch and return the thread tension

dial to “AUTO”.

Sew the smocking stitches between the gathered rows.

Remove the straight stitches between the gathered rows.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 91 92

No comments

JANOME Horizon Memory Craft 8200 QC Instruction Booklet Page 63