JANOME Horizon Memory Craft 8200 QC Instruction Booklet download pdf (Page 14)

For general sewing, set the thread tension dial at AUTO,

which covers a wide range of sewing conditions.

q Thread tension dial

Balancing Thread Tension

Auto-thread tension

Manual thread tension adjustment

YoushouldadjustthetensionmanuallyiftheLCDscreen

shows a tension setting other than AUTO.

Youmayalsoneedtoadjusttensionmanuallydepending

on the sewing conditions such as the type of fabric and

number of layers.

If the needle thread is too tight, the bobbin thread

appears on the right side of the fabric.

q Wrong side of fabric

w Right side of fabric

e Needle thread

r Bobbin thread

Turn the thread tension dial to a lower number to

decrease the thread tension.

Balanced thread tension

For straight stitch sewing, both needle and bobbin

threads will join at the middle of the fabrics.

For zigzag stitch sewing, the needle thread will appear

slightly on the wrong side of the fabric.

q Wrong side of fabric

w Right side of fabric

e Needle thread

r Bobbin thread

NOTE:

Manual thread tension adjustment may be required

when the stitch width is set more than “7.0” (see

below).

If the needle thread is too loose, the needle thread loops

on the underside of the fabric.

q Wrong side of fabric

w Right side of fabric

e Needle thread

r Bobbin thread

Turn the thread tension dial to a higher number to

increase the thread tension.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 91 92

No comments

JANOME Horizon Memory Craft 8200 QC Instruction Booklet Page 14