JANOME Horizon Memory Craft 8200 QC Instruction Booklet Page 90
- Page / 92
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
88
Cause
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set under the
presser foot when start sewing.
6. The threads were not drawn to the rear after sewing.
7. The fabric is moved too fast when stitching free motion quilting.
8. The thread is tangled around the spool.
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The fabric is pulled forward when using the open-toe foot.
4. The needle is too fine for the fabric being used.
5. An inappropriate presser foot is used.
1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the work being sewn.
3. A blue tip needle is not being used for sewing stretch, very fine fabrics
and synthetics.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure is not adjusted properly.
6. A stabilizer is not used when sewing very fine fabrics.
1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog is not raised after ”drop feed” sewing.
1. The needle thread tension is too loose.
2. The needle is too thick or too fine for the fabric.
1. The machine is not plugged in or foot control is not connected.
2. Thread has been caught in the hook race.
3. The presser foot is not lowered.
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
3. The buttonhole lever is not lowered.
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
1. The foot pressure is not suitable for fabrics being sewn.
1. Thread is too thick for the auto thread cutting.
2. Threads have been caught in the thread cutter mechanism.
1. Thread tension is not balanced.
Condition
The needle thread
breaks
The bobbin thread
breaks
The needle breaks
Skipped stitches
Seam puckering
The cloth is not
feeding smoothly
Loops on the
seams
The machine does
not work
Buttonhole sewing
is not sewn properly
The machine is
noisy
Layers shift
Auto thread cutting
failed
The needle thread
appears on the
wrong side of the
fabric when the
stitch width value
is larger than “7.0”.
Reference
Page 21
Page 12
Page 17
Page 17
Page 23
Page 29
Page 66
Use the spool holder.
Page 20
Page 84
Change the bobbin.
Page 17
Page 17
Page 66
Page 17
Use the correct foot.
Page 17
Page 17
Use the stretch stitch
needle.
Page 21
Change the needle.
Page 12
Page 21
Page 17
Make stitch shorter.
Page 11
Apply a stabilizer.
Page 84
Make stitch longer.
Page 11
Page 12
Page 17
Page 6
Page 84
Page 10
Pages 49
Apply an interfacing.
Page 45
Page 84
It is not abnormal for a faint humming sound to be heard from the internal motors.
The LCD screen and function key area may become warm after several hours of continuous use.
Page 84
Page 11
Page 7
Page 84
Page 12
Troubleshooting
- Instruction Book 1
- IMPORTANT SAFETY INSTRUCTIONS 3
- SAVE THESE INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- NAMES OF PARTS 5
- Standard Accessories 6
- Extension Table 7
- Accessories Storage 7
- GETTING READY TO SEW 8
- Machine Operating Buttons 9
- Controlling Sewing Speed 10
- Foot control 10
- Function Keys 11
- Knee Lifter 12
- Adjusting the Foot Pressure 13
- Dropping the Feed Dog 13
- Balancing Thread Tension 14
- CAUTION: 15
- CAUTION: 16
- Thread Needle 19
- Winding the Bobbin 20
- Drawing up the Bobbin Thread 25
- Selecting the Patterns 26
- Customizing Machine Settings 27
- TRADITIONAL SEWING 30
- 4.5 9.00.0 32
- 5.001.00 2.40 32
- Dual Feed Balancing Dial 33
- Lock-a-Matic Stitch 34
- Locking Stitch 34
- Triple Stretch Stitch 35
- Knit Stitch 35
- Zipper Sewing 36
- Rolled Hem 39
- Gathering 40
- Pintucking 40
- Zigzag Stitch 41
- Overcasting Stitch 42
- Double Overcasting Stitch 43
- Blind Hemming 44
- Shell Tuck 46
- Buttonholes 46
- Square Buttonhole 47
- Using the Stabilizer Plate 51
- Keyhole Buttonhole 52
- Stretch Buttonholes 52
- Corded Buttonhole 53
- Welted Buttonhole 54
- Button Sewing 56
- Applique 61
- Fringing 62
- Drawn Work 62
- Smocking 63
- Fagoting 64
- Patchwork 65
- Patchwork Piecing 65
- Quilting 66
- Stippling 67
- Free Motion Quilting (1) 67
- Clasp Stitches 67
- CAUTION: 68
- L1 L2 L3 L4 L5 69
- PROGRAMMING A PATTERN 72
- COMBINATION 72
- Programming Auto-lock Stitch 73
- 74
- Beginning 76
- Bridge Stitches 77
- w Blank space 78
- Monogramming 79
- Editing a Pattern Combination 81
- Duplicating a Pattern 82
- Uniform Stitch Adjustment 83
- Unified Needle Drop Position 83
- Individual Stitch Adjustment 84
- CARE AND MAINTENANCE 86
- Problems and Warning Signals 88
- Warning Sign 88
- Try this 88
- Troubleshooting 90
- 858-800-609 (EN) 92
Related products and manuals for Sewing machines JANOME Horizon Memory Craft 8200 QC
Sewing machines JANOME MS-5027 User Manual
(111 pages)
(111 pages)
(44 pages)© 2020, manymanuals.com. All rights reserved. | 0.423 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals