JANOME Horizon Memory Craft 8200 QC Instruction Booklet download pdf (Page 34)

Lock-a-Matic Stitch

Machine settings

q Pattern: MODE 1: 2, 2S

MODE 2: 02

w Thread tension: AUTO

e Presser foot: Zigzag foot A or

Dual feed foot AD

r Foot pressure: 5

Use this stitch to secure the beginning and the end of a

seam with backstitching. When you reach the end of the

seam, press the reverse button q once. The machine

will sew four reverse stitches, four forward stitches, and

then stop sewing automatically.

q Reverse button

This unique stitch is used where an invisible locking stitch

is needed. Lower the needle close to the front edge of the

fabric.

The machine will sew several locking stitches in place

and continue sewing forward. When you press the

reverse button q at the end of the seam, the machine will

sew several locking stitches in place, then stop sewing

automatically.

q Reverse button

Locking Stitch

Machine settings

q Pattern: MODE 1: 3, 3S

MODE 2: 03

w Thread tension: AUTO

e Presser foot: Zigzag foot A or

Dual feed foot AD

r Foot pressure: 5

Needle Plate for Straight Stitch

The stitch patterns 1, 2, 3, 4 (mode 1) can be sewn with

the needle plate for straight stitch.

Replace the needle plate with the needle plate for straight

stitch (refer to page 16).

“S” mark will appear at the end of the pattern number

when the needle plate for straight stitch is attached.

q Needle plate for straight stitch

w S mark

Mode 1:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

No comments

JANOME Horizon Memory Craft 8200 QC Instruction Booklet Page 34