JANOME Horizon Memory Craft 12000 Instruction Booklet download pdf (Page 16)

Threading the Machine

Press the needle up/down button to raise the take-up lever

to the highest position.

Press the lockout key to lockout the machine. The presser

foot will go down and the upper thread tension disks will

open.

q Lockout key

Pass the thread in the order from z to m.

z Hold the thread with both hands and pass the thread

into the guide slot.

w Guide slot

x Draw the thread to the left and around the corner of

the guide toward you.

Pull the thread along the right channel.

e Corner of the guide

r Right channel

c Draw the thread down along the right channel and

around the bottom of the thread guide plate.

Pull the thread up along the left channel.

r Right channel

t Thread guide plate

y Left channel

v While holding the thread at the spool, firmly draw the

thread up and to the back of the take-up lever. Draw

the thread forward to draw it into the eye of the take-up

lever.

u Eye of the take-up lever

b Then pull the thread down along the left channel

and through the lower thread guide.

i Lower thread guide

n Slide the thread behind the needle bar thread guide

from the left.

o Needle bar thread guide

m Thread the needle with the needle threader (refer to

the next page).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 150 151

No comments

JANOME Horizon Memory Craft 12000 Instruction Booklet Page 16