JANOME Horizon Memory Craft 12000 Instruction Booklet download pdf (Page 11)

q Start/stop button

Press this button to start or stop the machine. This button

can be used either in the ordinary sewing mode or

embroidery mode.

In the ordinary sewing mode, the machine starts running

slowly for the first few stitches it then runs at the speed

set by the speed control slider.

The machine runs slowly as long as this button is being

pressed.

The button turns red when the machine is running, and

green when it stops.

NOTE:

The start/stop button cannot be used in the ordinary

sewing mode when the foot control is connected.

w Reverse button

When sewing stitch pattern U1, U4, U9-12, Q1-3 or

BR1-10, the machine will sew in reverse as long as the

reverse button is pressed.

If stitch pattern U1, U4, U9-12, Q1-3 or BR1-10 has been

selected and the foot control is not connected, the

machine will start sewing in reverse as long as the

reverse button is pressed.

If you press the reverse button when sewing any other

patterns, the machine will immediately sew locking

stitches and automatically stop.

Machine Operating Buttons

e Auto-lock button

When sewing stitch pattern U1, U4, U9-12, Q1-3 or

BR1-10, the machine will immediately sew locking

stitches and automatically stop when the auto-lock button

is pressed.

When sewing all other patterns, the machine will sew to

the end of the current pattern, sew locking stitches and

stop automatically.

The machine will trim the threads automatically after

locking the stitch when the auto thread cutting option is

turned on (refer to page 90).

r Needle up/down button

The machine will always stop with the needle down

except when buttonholes, darning, tacking, eyelets or

monograms are selected.

Press this button to bring the needle bar up or down.

t Presser foot lifter button

The presser foot will go up or go down by pressing this

button.

You can use also the presser foot lifter and knee lifter to

raise and lower the presser foot.

y Thread cutter button

Press this button when you finish sewing to trim the

threads. The needle bar and presser foot automatically

rise after trimming the threads.

Refer to page 29.

NOTES:

The thread cutter button does not function:

- soon after turning on the power.

- when the presser foot is raised with the foot lifter.

- when being pressed 4 times in a row.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 150 151

Comments to this Manuals

No comments

JANOME Horizon Memory Craft 12000 Instruction Booklet Page 11

Comments to this Manuals

Related products and manuals for Sewing machines JANOME Horizon Memory Craft 12000