JANOME JW5622 Instruction Booklet download pdf (Page 28)

SECTION VI.

MAINTENANCE OF YOUR MACHINE

Cleaning the Bobbin Case and the Hook

Dismantling Shuttle Race Unit

Raise the needle to its highest position and open

the hook cover. Open the hinged latch of bobbin

case and take it out of the machine.

Open the hook race ring holders and remove the

shuttle race ring. Remove the hook.

* Clean the hook race with a brush and a soft dry

cloth.

Bobbin case

Shuttle race ring holder

Shuttle race ring

Shuttle

Shuttle race

Assembling Shuttle Race Unit

Hold the shuttle by the center pin and ﬁt it carefully

back into the shuttle race, forming a perfect circle

with the shuttle driver.

Attach the shuttle race ring making sure the

bottom pin ﬁts into the notch.

Lock the shuttle race ring by turning the holders

back into position. Insert the bobbin case.

y Pin

u Notch

WARNING:

•Turnthepowerswitchoffand/orunplugthe

machine before dismantle or cleaning the

machine.

•Donotdismantlethemachineotherthanas

explained in this section.

CAUTION:

Do not store the machine in a high-humidity

area, near a heat radiator, or in direct sunlight.

Stretch Stitch Patterns

Pattern selector: A/B–L

Presser foot: Zigzag foot

Thread tension: 3–6

Stitch length: S.S.

Stitch width: 3−5

If forward and reverse feeds become unbalanced

due to the type of fabric, adjust the balance by turn-

ing the stitch length dial as follows:

Ifpatternsarecompressed,turnthedialtoward“+”.

Ifpatternsaredrawn,turnthedialtoward“–”.

(See page 11)

w e

r t

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

JANOME JW5622 Instruction Booklet Page 28

Comments to this Manuals

Related products and manuals for Sewing machines JANOME JW5622