JANOME JW5622 Instruction Booklet download pdf (Page 16)

q Center needle position

w Guide lines

e Numbers

Seam Guide Lines

The numbers on the needle plate indicate the

distance between the center needle position and

the guideline.

The numbers in front are centimeters.

The numbers in back are fractions of an inch.

Number 15 20 4/8 5/8 6/8

Distance (cm) 1.5 2.0 1.3 1.6 1.9

Turning a Square Corner

To turn a square corner 5/8” (1.6 cm) from the

fabric edge.

Stop stitching and lower the needle by turning the

handwheel counterclockwise.

Raise the presser foot and turn the fabric to line

the edge with the 5/8” (1.6 cm) seam guide.

Lower the presser foot and begin stitching in the

new direction.

Line up the fabric edge facing you with the

cornering guide shown.

Cornering guide

q w

Variable Needle Position

Turn the stitch width dial to move the needle

between the center and left needle position when

the straight stitch is selected.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

JANOME JW5622 Instruction Booklet Page 16