JANOME Hello Kitty 13512 Instruction Booklet download pdf (Page 16)

q Center needle position

w Guide lines

e Numbers

Seam Guide Lines

The numbers on the needle plate indicate the

distance between the center needle position and

the guideline.

The numbers in front are centimeters.

The numbers in back are fractions of an inch.

Number 15 20 4/8 5/8 6/8

Distance (cm) 1.5 2.0 1.3 1.6 1.9

Turning a Square Corner

Toturnasquarecorner5/8”(1.6cm)fromthe

fabric edge.

Stop stitching and lower the needle by turning the

handwheel counterclockwise.

Raise the presser foot and turn the fabric to line

theedgewiththe5/8”(1.6cm)seamguide.

Lower the presser foot and begin stitching in the

new direction.

Line up the fabric edge facing you with the

cornering guide shown.

Cornering guide

q Pattern selector: C

w Presser foot: Zigzag foot

e Thread tension: 2–5

r Stitch length: 0.5–4

Zigzag Stitching

Simple zigzag stitching is widely used for

overcasting, sewing on buttons, etc.

Turn the pattern selector between the zigzag

stitch (C) and straight stitch (left position) (B) to

adjust the stitch width.

w e

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

JANOME Hello Kitty 13512 Instruction Booklet Page 16