JANOME Hello Kitty 13512 Instruction Booklet download pdf (Page 12)

10

q

e

r

w

t

y

Thread Tension Dial

• Correcttension

The thread tension is adjusted depending

on the sewing materials, layers of fabric and

sewing method.

For an ideal zigzag stitch, the bobbin thread

does not show on the right side (top side) of

the fabric, and the needle thread shows slightly

on the wrong side (bottom side) of the fabric.

q Needle thread (Top thread)

w Bobbin thread (Bottom thread)

e Right side (Top side) of fabric

r Wrong side (Bottom side) of fabric

t Thread tension dial

y Setting mark

• Needlethreadtensionistootight

When the bobbin thread (bottom thread)

appears on the right side (top side) of the

fabric, loosen the needle thread tension by

moving the dial to a lower number.

• Needlethreadtensionistooloose

When the needle thread (top thread) appears

on the wrong side (bottom side) of the

fabric, tighten the needle thread tension by

moving the dial to a higher number.

z

x

c

Drawing Up Bobbin Thread

z Raise the presser foot and hold the needle

thread lightly with your left hand.

x Turn the handwheel slowly toward you with

your right hand until the needle goes down and

continue turning the handwheel until the take-

up lever is at its highest position.

Lightly draw up the needle thread forming a

loop of the bobbin thread.

c Pull 10 cm (6˝) of both threads back and under

the presser foot.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments