JANOME DC5100 Instruction Booklet Page 49
- Page / 60
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
45
This machine is equipped with a twin needle that can be
used to sew parallel rows straight on decorative stitches
adding an exquisite touch to table linens and clothing.
Use stitch patterns 01 to 05, 8 to 10, 24, 27 to 30, 33 to 35,
37, 38, 43 to 47, 53, 55, 61 to 63, 65, 67, 70, 72 to 74, 77,
91, 94, and 95.
Insert the additional spool pin, and put the felt and spool on
it with the thread coming off the spool as shown.
When threading the machine for twin needle sewing follow
these instructions making sure you separate the threads,
placing one in each thread guide on the needle bar.
q
e
w
t
y
q wer
NOTE:
• Do not set the stitch width at more than 3, otherwise
the needle may hit the needle plate or presser foot and
could possibly break.
•Turn off and unplug the machine before changing the
needle to the twin needle.
• Use #60 or finer threads for twin needle sewing.
NOTE:
To avoid the thread twisting, it is advisable to thread the
machine one thread at a time.
•Starting to sew
Turn off and unplug the machine before changing the
needle to the twin needle. Insert the additional spool pin,
and put the felt and spool on it with the thread coming off
the spool as shown. Set the stitch width to 3.0 or less.
Turn the handwheel with your hand to check if the needle
does not hit the presser foot or needle plate.
When threading the machine for twin needle sewing
follow this chart making sure you separate the threads,
placing one in each thread guide on the sides of the
needle bar.
Threading from q to e is the same as for single thread.
Refer to page 16.
r Draw the threads down and slide them through
the lower thread guide.
t Slide the threads through the needle bar thread
guide one to each side.
y Thread the needle from front to back.
At corners, raise the needles until they clear the
fabric. Partially raise the presser foot and carefully
pivot the fabric.
When twin needle sewing is completed, change
needle and reset tension (if necessary).
To return to single needle sewing, return the
stitch width to the original setting.
r
Twin needle stitch
q Stitch Pattern: 95
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot: F
r Twin needle
- Instruction book 1
- IMPORTANT SAFETY INSTRUCTIONS 3
- SAVE THESE INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- SECTION I. NAME OF PARTS 6
- Standard accessories 7
- For your safety 8
- Controlling sewing speed 8
- Operating instrucitons: 8
- Cursor keys 10
- Mode key 10
- Stitch width selection key 10
- Stitch length selection key 10
- Memory key 11
- Clear key 11
- Function touchpad 11
- Number key selection 12
- Language selection 13
- Presser foot lifter 14
- Thread cutter 14
- Extension table 14
- Changing needle 15
- Changing presser foot 15
- Bobbin winding 17
- Threading the machine 20
- SECTION III. BASIC SEWING 23
- Turn a square corner 24
- Quilting 24
- Manual stitch length 25
- Sewing on heavy fabrics 25
- Variable needle position 25
- To drop or raise the feed dog 26
- Quilting with walking foot 27
- Automatic reverse stitch 28
- Triple stretch stitch 28
- Straight stretch 28
- Auto-lock stitch 29
- Saddle stitch 29
- Zigzag stitch 29
- Overcasting 30
- Tricot stitch 30
- Knit stitch 30
- Overedge stitch 31
- Double overedge stitch 31
- Button sewing 32
- Automatic buttonhole 33
- Round end buttonhole 35
- Keyhole buttonhole 35
- Knit buttonhole 36
- Stretch buttonhole 36
- Corded buttonhole 37
- Zipper sewing 39
- Zipper sewing (continued) 40
- Darning stitch 41
- Bartacking 42
- Pintucking 43
- Blind hem stitch 43
- Shell stitch 44
- Applique 44
- Smocking 45
- Fagoting 45
- Scallop stitch(B) 46
- Scallop stitch (A) 46
- Patchwork 47
- Satin stitch 47
- Decorative stitch 48
- Cross stitch 48
- Sand stitch 48
- Twin needle stitch 49
- Adjusting pattern balance 50
- Extender stitch combination 51
- Sewing letters 53
- Editing function 54
- Assemble the hook race 56
- Removing the light bulb 57
- Attaching the light bulb 57
- Troubleshooting 58
- 842-800-323 60
- Printed in Taiwan 60
Related products and manuals for Sewing machines JANOME DC5100
(28 pages)
(75 pages)
(64 pages)
Sewing machines JANOME MS-5027 User Manual
(111 pages)
(111 pages)
© 2020, manymanuals.com. All rights reserved. | 4.569 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals