JANOME JW7630 Instruction Booklet download pdf (Page 25)

Raise the presser foot.

Press the Up/Down needle

button to raise the thread

take-up lever to its highest

position.

Threading the Machine

1 Draw the thread from the spool. Hold the upper

thread at the spool with your finger.

q Hold the thread

2 Slip the thread under the thread guide from the

right and down along the right channel.

Be sure that the thread passes between the

tension disks.

w Thread guide

e Right channel

r Tension disks

3 Then draw the thread around the bottom of the

thread guide plate.

t Thread guide plate

4 Firmly draw the thread up along the left channel to

the take-up lever and down into its eye from the

right to the left.

y Thread take-up lever

5 Then down through the lower thread guide.

u Lower thread guide

6 Slide the thread behind the needle bar thread

guide on the left.

i Needle bar thread guide

Thread the needle from front to back by hand or

use the built-in needle threader (see page 26).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

No comments

JANOME JW7630 Instruction Booklet Page 25