JANOME Hello Kitty 11706 Instruction Booklet download pdf (Page 32)

To dismantle hook race unit:

Raise the needle to its highest position and open the

hook cover.

Open the hinged latch of bobbin case and take it out of

the machine.

Open the hook race ring holders and remove the hook

race ring.

Remove the hook.

Clean the hook race with a brush and a soft dry cloth.

SECTION 6. CARE OF YOUR MACHINE

Cleaning the Feed Dog

Remove the needle and the presser foot.

Remove the needle plate set screw and remove the

needle plate.

With a brush, clean out dust and lint clogging the feed

dog teeth.

Reset the needle plate.

Note:

Turn off the power switch and/or unplug

the machine before cleaning the machine.

Do not dismantle the machine other than as

explained in this section.

Cleaning the Hook Race Area

To assemble hook race unit:

Hold the hook by the center pin and fit it carefully

back into the hook race, forming a perfect circle

with the shuttle driver.

Attach the hook race ring making sure the bottom

pin fits into the notch.

Lock the hook race ring by turning the holders back

into position. Insert the bobbin case.

Notch

Bobbin case

Hook race ring holders

Hook race ring

Hook

Hook race

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

No comments

JANOME Hello Kitty 11706 Instruction Booklet Page 32