JANOME 49018 Instruction Booklet download pdf (Page 64)

Applique

Machine setting

q Stitch pattern: 16

w Needle thread tension: 1 to 4

e Presser foot: Satin stitch foot: F

* The stitch width can be changed without changing its

center needle position.

Place an applique on the fabric and baste or pin it in place.

Sew while guiding the fabric so the needle falls along the

outer edge of the applique.

q Applique

w Outer edge

• To adjust the stitch width

Select pattern 16.

Press the cursor buttons to move the cursor under

the stitch width value “3.5” e (default setting).

Press the button to decrease the stitch width r.

Press the button to increase the stitch width t.

The stitch width will be varied based on the centered

needle drop position y.

e Stitch width (3.5)

r Stitch pattern 31 (stitch width decreased)

t Stitch pattern 31 (stitch width increased)

y Center needle drop position

Decorative Satin Stitch

Machine setting

q Stitch pattern: 17

w Needle thread tension: 3 to 6

e Presser foot: Satin stitch foot: F

For a delicate appearance on fabric such as chiffon, use a

single layer with a tear-away backing, if necessary.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 91 92

No comments

JANOME 49018 Instruction Booklet Page 64