Janome Memory Craft 6500 User Manual download pdf (Page 75)

73

The elongation button is pressed when a

pattern that cannot be elongated has been

selected.

Elongation is applicable only

to satin stitches.

The power is turned on again after auto

thread cutting has been interrupted.

The presser foot is raised before auto

thread cutting is completed.

Press the Thread cutter button

to finish auto thread cutting.

The machine is started when it halts due to

the overload.

The feed dog is dropped while sewing.

The bobbin winder spindle is locked while

winding a bobbin.

Wait for at least 15 seconds to

restart. Remove tangled threads

around hook race and auto thread

cutting device.

Do not drop or raise the feed dog

while the machine is running.

Turn off the power and remove

tangled threads.

The machine is out of order due to a

problem in the item indicated.

(Example: “BM init error” means error in

initialization of stepping motor.)

Contact the service center or the

store from whom the machine was

purchased.

pip Normal operation

pip-pip-pip Invalid operation or malfunction

Warning Sign

Cause

Try this

Audible Signal

The LCD screen shows an

abnomal display.

Turn the power off and turn it on again.

The Buzzer Sounds when:

1 2 ... 70 71 72 73 74 75 76 77 78

Comments to this Manuals

No comments