Janome Memory Craft 6500 User Manual download pdf (Page 12)

Changing the Presser Foot

CAUTION:

Turn OFF the power switch before changing the foot.

Always use the proper foot for the selected pattern. Wrong

foot can cause the needle to break.

To snap off:

Raise the needle and presser foot.

Press the red button on the back of the foot holder and the

foot will drop.

1 Red Button

2 Foot Holder

3Presser Foot

To snap on:

Place the presser foot so the pin on the foot lies just under

the groove of the foot holder.

Lower the foot holder to lock the foot in place.

Each foot is marked with a letter for identification.

4 Groove

5 Pin

6 Identification Letter

Detaching and Attaching the Foot Holder

WARNING:

Turn OFF the power switch before detaching or attaching

the foot holder.

To detach:

Raise the presser bar and turn the thumbscrew

counterclockwise to remove the foot holder.

1 Thumbscrew

2 Foot holder

To attach:

Align the hole in the foot holder with the threaded hole in

the presser bar and insert the thumbscrew through the

hole.

Tighten the thumbscrew by turning it clockwise.

3 Presser Bar

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 77 78

No comments

Janome Memory Craft 6500 User Manual Page 12