JANOME Memory Craft 11000 Special Edition Instruction Booklet download pdf (Page 59)

120

1.80

Patchwork

Patchwork piecing

There are 3 stitches for seaming patchwork pieces in

this section.

The default stitch length is set at 1.8 mm, ideal for

patchwork piecing, but you can fine tune the stitch

length by pressing the “+” or “-“ key.

Attach 1/4” seam foot O, which helps you to keep a

constant 1/4” (6 mm) seam allowance.

Put 2 pieces of fabric with right sides together.

Place the patchwork pieces under the foot so that the

edge of the fabric matches the guide on the presser

foot.

When you stop the machine, a message will appear.

Press OK key and the seam length is memorized to

sew another piece in the same length.

Press key to sew in a different size.

You can seam patchwork pieces at the desired angle

without marking, by using the angle scale on the

needle plate.

Applique

Cornering for applique

You can select the normal start over or cornering

start over for applique stitches.

Cornering start over is very helpful when sewing an

applique with sharp corners.

Press the cornering key and the start over

key will change to the cornering start over key.

The machine stops with the needle in the down

position so you can pivot the fabric to change the

sewing direction.

Press the cornering start over key before

sewing in the new direction. The machine will sew the

stitch pattern from the beginning without locking

stitches.

If you select normal start over, the machine will sew

the stitch pattern with locking stitches at the beginning.

Blanket Stitch

Zigzag Stitch

Same size

Different size

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

Comments to this Manuals

No comments

JANOME Memory Craft 11000 Special Edition Instruction Booklet Page 59

Comments to this Manuals

Related products and manuals for Sewing machines JANOME Memory Craft 11000 Special Edition