JANOME Memory Craft 11000 Special Edition Instruction Booklet download pdf (Page 36)

Sensor (Square) buttonhole

Select pattern B1.

To sew

1 Attach the automatic buttonhole foot R snapping the

pin into the groove of the foot holder. Raise the

presser foot.

2 Pull the button holder to the rear, and place the

button in it. Push it tightly against the button.

NOTES:

The buttonhole size is automatically set by placing a

button into the button holder in the rear of the automatic

buttonhole foot R.

The button holder of the foot takes a button size of up to

2.5 cm (1") in diameter.

If the button is extremely thick, make a test buttonhole

on an extra piece of the fabric. If it is difficult to fit the

button through the test buttonhole, you can lengthen the

buttonhole by pulling the button holder back a little. The

length of the buttonhole will be increased.

3 Pull the buttonhole lever down as far as it will go.

4 Press the start/stop button to sew the buttonhole.

NOTE:

A warning message will appear and the machine will

stop automatically if you start to sew a buttonhole

without pulling down the buttonhole lever.

Press the exit key and pull down the buttonhole lever to

restart.

5 When buttonhole sewing is finished, push the

buttonhole lever up as far as it will go.

6 Remove the fabric and place a pin just below the

bartack at each end to prevent accidentally cutting

threads. Cut the opening with the seam ripper. Use

an eyelet puncher to open a keyhole buttonhole.

Buttonholes(B)

15 16

17 18 19 20 21

Sensor BH

Pull down BH Lever.

Auto

NOTE:

Make sure there is no gap between the slider and front

stopper, otherwise the left and right lengths will be

different.

Pull down BH Lever.

No gap

Step-1

Step-2 Step-3

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 111 112

Comments to this Manuals

No comments

JANOME Memory Craft 11000 Special Edition Instruction Booklet Page 36

Comments to this Manuals

Related products and manuals for Sewing machines JANOME Memory Craft 11000 Special Edition