Janome MEMORYCRAFT 300E User Manual download pdf (Page 46)

9 10

CARE AND MAINTENANCE

Cleaning the Hook Race and Feed Dog

Turn the handwheel to raise the needle, and then

unplug the sewing machine.

NOTE:

Do not dismantle the machine other than what is

explained on this page.

1 Remove the setscrews with the screwdriver supplied

with the machine. Remove the needle plate.

2 Lift up the bobbin holder and remove it.

1 Screwdriver

2 Setscrews

3 Needle plate

3 Clean the bobbin holder with a lint brush.

4 Clean the feed dog and hook race with the lint brush.

4 Bobbin holder

5Lint brush

5 Clean the hook race with a dry cloth.

(You may also use a vacuum cleaner.)

7 Hook race

8 Soft dry cloth

Assemble the hook race

1. Insert the bobbin holder so that the knob fits next to

the stopper in the hook race.

9 Knob

10 Stopper

2. Insert the bobbin.

3. Reattach the needle plate, aligning the needle plate

guide pins with the guide holes on the needle plate

and tighten the screw.

11 Needle plate guide pins

NOTE:

After cleaning the machine, make sure the needle and

presser foot are attached.

1 2 ... 41 42 43 44 45 46 47 48

No comments

Janome MEMORYCRAFT 300E User Manual Page 46