Janome MEMORYCRAFT 300E User Manual download pdf (Page 15)

Changing Needles

1 Turn off the power switch. Raise the needle by

turning the handwheel and lower the presser foot.

2Loosen the needle clamp screw by turning it

counterclockwise.

Remove the needle from the clamp.

Insert a new needle into the needle clamp with the

flat side of the needle to the rear.

1 Needle clamp screw

2 Flat side of the needle

When inserting the needle into the needle clamp, push

it up as far as it will go and tighten the needle clamp

screw firmly.

To check needle straightness, place the flat side of the

needle onto something flat (a needle plate, glass etc.)

The gap between the needle and the flat surface should

be consistent.

3 Gap

Never use a blunt needle.

NOTES:

Use the size 11 Blue Tipped Needles for fine fabrics.

For medium to heavy weight fabrics, use the size 14

needles.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

Janome MEMORYCRAFT 300E User Manual Page 15