JANOME 3434D Instruction Booklet download pdf (Page 49)

Starting Sewing

1. Insert the fabric under the toe of the foot.

(It is not necessary to raise the foot.)

2. Turn the handwheel gently toward you a couple

of turns and check the thread chain. Then start

sewing slowly. The fabric will be automatically fed.

Guide the fabric in the desired direction.

* For heavyweight fabric, raise the presser foot

and insert the fabric in front of the knife.

Then lower the foot and start to sew while guiding

the fabric.

Finishing Sewing

1. When stitching is completed, continue to run the

machine slowly to produce a thread chain for

about 12 cm (5´´) while pulling the thread chain

slightly to the back.

2. Cut the threads with the thread cutter as

illustrated, leaving about 5 cm (2´´) thread chain

from the end of the fabric.

q Thread cutter

Sewing Continuously

Insert the next fabric under the toe of the foot, then

start sewing. It is not necessary to raise the presser

foot for ordinary fabric.

* For heavyweight fabric, raise the presser foot

and insert the fabric in front of the knife.

Then lower the foot and start to sew while guiding

the fabric.

How to use Guide Lines

On the top of the looper cover are guide lines

indicating the distance from the needle position.

Please use them as sewing guides.

Mark L indicates the distance from the left needle.

Mark R indicates the distance from the right needle.

The distance between center of guide line and

needle position is 5/8 inch.

TEST STITCHING

1 2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 86 87

No comments

JANOME 3434D Instruction Booklet Page 49