JANOME 1200D Professional Instruction Booklet download pdf (Page 81)

Securing the End of Seam

Sew to the edge of the fabric and stop.

Raise the needles and presser foot.

While pushing the tension release lever up, gently pull

the fabric to the back to remove the thread chain from

the chaining finger.

Turn fabric upside down (top side of seam will be next

to the feed dog). Gently pull the threads above the

tension discs to remove any slack.

Align the edge of the fabric with the needle plate and

lower the presser foot.

Sew about 5 cm (2”) over the seam and angle off the

fabric.

IMPORTANT:

Re-threading Machine After Thread Breaks

If the upper looper thread breaks while sewing, hand

turn the handwheel to clear the lower looper thread off

the upper looper. Rethread upper looper and hand turn

the handwheel to form a stitch.

If the lower looper thread breaks while sewing, cut and

remove needle threads from needle eyes. Rethread

lower looper. Rethread needle eyes. Needles must be

threaded after the lower looper.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 114 115

No comments

JANOME 1200D Professional Instruction Booklet Page 81