Janome MEMORY CRAFT 4800 User Manual download pdf (Page 24)

Straight Stitch Sewing

1 Stitch pattern: 01

2 Presser foot: Foot A or foot H

• Starting to sew

Raise the presser foot and position the fabric next to a

seam guide line on the needle plate (see page 24).

Lower the needle to the point where you want to start.

Lower the presser foot and pull the threads toward the

back. Depress the foot control. Gently guide the fabric

along a seam guide line letting the fabric feed naturally.

• Changing sewing direction

Stop the machine and bring the needle down into the

fabric by pressing the Up/down needle position button.

Raise the presser foot.

Pivot the fabric around the needle to change sewing

direction as desired. Lower the presser foot.

1 Up/down needle position button

2 Presser foot lifter

• Finishing sewing

To fasten the ends of seams, press the reverse button

and sew several reverse stitches.

Raise the presser foot. Remove the fabric, draw the

threads to the back and cut using the thread cutter.

The threads are cut at the proper length for starting the

next seam.

- When pattern is selected, reverse stitches are

sewn automatically at the beginning of the seam,

then sewing continue forward.

- When you reach the end edge of the fabric, press

the reverse button once.

The machine will sew four reverse stitches, four

forward stitches then stop sewing.

1 Reverse button

2 Thread cutter

3 Fabric

SECTION III BASIC SEWING

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

No comments

Janome MEMORY CRAFT 4800 User Manual Page 24