JANOME Horizon Memory Craft 8900 QCP Instruction Booklet download pdf (Page 61)

Memory buttonholes

Machine settings

q Pattern: 24

w Thread tension: AUTO

e Presser foot: Automatic buttonhole foot R or

Satin stitch foot F

r Foot pressure: 5

z Pull the button holder all the way out.

x Mark the buttonhole position on the fabric.

Place the fabric under the foot, and lower the needle

at the starting point.

Lower the foot and start sewing while pulling the

needle thread lightly to the left. After sewing a few

stitches, free the thread and continue sewing.

NOTE:

Youdonotneedtopulldownthebuttonholelever.

If you wish to sew a buttonhole longer than the size

permitted by the automatic buttonhole foot R, use

satin stitch foot F.

c Sew the left side up to the required buttonhole length

and stop the machine. Then press the reverse button.

q Reverse button.

z x

NOTE:

Use satin stitch foot F where the automatic buttonhole

foot cannot be used.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 107 108

No comments

JANOME Horizon Memory Craft 8900 QCP Instruction Booklet Page 61