JANOME 41012 Instruction Booklet download pdf (Page 21)

Zipper Application

Pattern selector: A

Presser foot: Zipper foot

Thread tension: 2–6

Stitch length: 1.5-4

Pin or baste zipper tape to fabric and place it

under the foot.

Smooth the threads toward the back and lower

the foot.

To sew the left side of the zipper, guide the zipper

teeth along the edge of the foot and stitch through

the garment and zipper tape.

Turn the fabric and sew the other side of the

zipper in the same way as you did the left side.

q w e

w e

[A]

[B]

Pattern selector: E or F

Presser foot: Blind hem foot

Thread tension: 1–3

Stitch length: 1–3

Blind Hem Stitch

z On heavyweight fabrics that ravel, the raw

edge should be overcast ﬁrst. Then fold the

hem, as illustrated, leaving 1/4˝ (0.7 cm) of the

hem edge showing.

q Wrong side of the fabric

w 1/4˝ (0.7 cm)

[A] Heavy weight fabrics

[B] Fine or medium weight fabrics

x Position the fabric, so that the needle at its

leftmost position just pierces the edge of the

fold.

c Turn the guide screw to adjust the guide

aligning with the folded edge.

Sew along the folded edge guiding the fabric

so the needle catches the folded edge.

e Guide screw

r Guide

t Folded edge

v After hemming is completed, press together

both sides of the ﬁnished hem. The top side of

the fabric should show only the blind stitches.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

JANOME 41012 Instruction Booklet Page 21

Comments to this Manuals

Related products and manuals for Sewing machines JANOME 41012